Zum Inhalt der Seite

Sempercold 2SN-K

Compact hydraulic hose construction exceeds DIN EN 857 2SC, SAE 100 R16S and SAE 100 R19 (DN6 - DN19)
Higher pressure at reduced bend radii; with temperature range down to -50°C / -58°F

General

Tube

Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC)

Reinforcement

Two braids of high tensile steel wire

Cover

Abrasion and ozone resistant synthetic rubber

Temperature range

-50°C to 100°C / -58°F to +212°F

Standard branding

Embossed tape

Note

Impulse tested up to 1 million cycles (tested acc. to ISO6803:2017 / DN31 tested up to 200.000 cycles)

Technical details

Nominell Innen -Ø Geflecht-Ø Außen-Ø Betriebsdruck (max.) Min. Berstdruck Biegeradius (min.) Gewicht ca.
mm Zoll dash mm Zoll mm Zoll mm Zoll bar psi bar psi mm Zoll lbs/ft kg/m
6 1/4 -4 6,6 0,26 11,5 0,45 13,4 0,53 450 6525 1800 26100 45 1,8 0,18 0,27
8 5/16 -5 8,3 0,33 13,0 0,51 15,0 0,59 420 6090 1680 24360 55 2,2 0,22 0,32
10 3/8 -6 9,9 0,39 14,7 0,58 16,8 0,66 385 5585 1540 22340 65 2,6 0,26 0,38
12 1/2 -8 13,0 0,51 18,4 0,72 20,5 0,81 350 5075 1400 20300 90 3,5 0,35 0,52
16 5/8 -10 16,4 0,65 21,9 0,86 23,7 0,93 290 4205 1160 16820 100 3,9 0,41 0,61
19 3/4 -12 19,5 0,77 26,0 1,02 27,7 1,09 280 4060 1120 16240 120 4,7 0,53 0,79
25 1 -16 26,0 1,02 32,9 1,30 35,6 1,40 200 2900 800 11600 150 5,9 0,77 1,15
31 1-1/4 -20 32,5 1,28 40,5 1,59 43,5 1,71 175 2540 700 10160 300 11,8 1,06 1,57
Zurück zur Hauptnavigation
Zurück Geflecht & Spiral Hydraulikschläuche