To the content


Chemical – UHMWPE black – 250 psi – S&D – flat corrugated



Flexichem Mobil has been specially developed for use in tankers used to transport chemicals.

Suitable for the transport of acids, alkalis, salts, organic compounds (alcohols, esters, ketones, etc.) incl. aromatic substances, chlorinated hydrocarbons and oxidising acids (see our chemical resistance list).


The UHMWPE tube has an extremely low friction coefficient and good abrasion resistance.

Very robust but also extremely flexible, due to special spiral design.

Temperature range

Tube depending on the flow medium to +250°F, but always below boiling point. Hose flexible down to -31°F. Steam cleaning without pressure up to +266°F / max. 30 min.

Safety factor

4 : 1


UHMWPE, black, electrically conductive, smooth.


Textile wrapped, zinc plated steel wire double helix, 2 crossed copper wires.


EPDM, black, resistant to ozone and weather, abrasion resistant, electrically conductive, flat corrugated with cloth impression.


according customer request.


ATTENTION: The temperature of the medium must be lower than its boiling point.

ATTENTION: Please refer to the Semperit resistance list or, in case of doubt, contact Semperit.

ATTENTION: Continuous use at the peak values reduces the service life.

Technical details

Article number Internal-Ø Wall width External-Ø Work. pressure (max.) Number of inserts Bending radius (min.) Weight approx. Coil length (max.)
mm inch mm inch psi inch lbs/ft ft
65375 2565 25.4 1 6.5 1.5 250 2 5 0.54 200
65375 5170 50.8 2 7.0 2.53 250 2 10 1.08 200
65375 7675 76.2 3 7.5 3.56 250 2 16 1.80 200

Vacuum resistance up to -26,6 inHg

To the main navigation
Back to Datasheets Industrial USA