TU40

The TU40 hose quality is known as a very well established multipurpose hose which can be used  in various applications as for example in industry, construction, agriculture or vehicle repair shops.

By offering 40bar working pressure combined with very low temperature resistance the hose is perfectly designed for most demanding high pressure mineral oil & compressed air applications. 

Our TU40 product can be used for B7 (EN 590:2017) and B20 with a maximum aromatic content of 50%.

For the usage with B100 (pure biodiesel / 100% FAME/RME)) as well as E5 (EN 228:2017), E10, E85 and E100 a sufficient suitability needs to be checked under real working conditions prior usage.

-45°C / +100°C, compressed air -45°C / +70°C.

4 : 1

NBR, black, electrically conductive, smooth.

Textile spiral.

NBR/EPDM, black, resistant to ozone and weather, abrasion resistant, resistant to oil, electrically conductive, smooth.

continuous inkjet, white letters: "SEMPERIT (S) TU 40 Öl/Luft Oil/Air PN 40 bar Conductive R < 10⁶ Ohm/m MADE IN EU //////".

The usage of our product is only allowed for land and sea applications.

ATTENTION: For last valid information regarding oil & fuel suitability please always refer to the Semperit oil & fuel suitability matrix or, in case of doubt, contact Semperit.
ATTENTION: Not to be used as a petrol pump hose.
ATTENTION: Not suitable for the usage as fuel line hose of vehicles and in engine compartments.
ATTENTION: Not suitable for supply of any engine-driven vehicles 

Tolerances according to producer specification. 50m coil: max. 3 pieces in coil, minimal length 5m.