The TU25 hose quality is known as a very well established multipurpose hose which can be used in various applications as for example in industry, construction, agriculture or vehicle repair shops
Additionally the TU25 could be used as an alternative to any standard air/water hose. Especially for compressor applications where demanding oil resistance is required the TU25 quality could make the positive difference.
Our TU25 product can be used for E5 (EN 228:2017) and E10 as well for B7 (EN 590:2017) and B20 with a maximum aromatic content of 50%.
For the usage with B100 (pure biodiesel / 100% FAME/RME) as well as E85 and E100 a sufficient suitability needs to be checked under real working conditions prior usage.
-40°C / +80°C.
3,15 : 1
NBR, black, electrically conductive, smooth.
NBR/EPDM, black, resistant to ozone and weather, abrasion resistant, resistant to oil, electrically conductive, smooth, 3 red longitudinal stripes.
continuous inkjet, white letters: "SEMPERIT (S) TU 25 Öl/Luft Oil/Air PN 25 bar Conductive R < 106 Ohm/m MADE IN EU //////".
The usage of our product is only allowed for land and sea applications.
ATTENTION: For last valid information regarding oil & fuel suitability please always refer to the Semperit oil & fuel suitability matrix or, in case of doubt, contact Semperit.
ATTENTION: Not to be used as a petrol pump hose.
ATTENTION: Not suitable for the usage as fuel line hose of vehicles and in engine compartments.
ATTENTION: Not suitable for supply of any engine-driven vehicles
|Article number||Internal-Ø||Wall width||External-Ø||Work. pressure (max.)||Number of inserts||Bending radius (min.)||Weight approx.||Coil length (max.)|